www.express-builder.com

3" Car BI-Xenon Universal HID Projector Lens Kit ANGEL DEVIL EYE H1 H4 H7 35W AC

Search ebay for this- make sure you get the AC version of the inverter. The inverter converts the 12v aircraft power to AC and not cycled DC. Runs cooler and lasts longer. Around $100 or so.

Chapter 1 was mostly how to do fiberglass work, 2 was a lot of how to use the shipping crate for a work area. When you get to installing your wings, let me know if you dont have the original template for the inside of the wing construction- the plywood cutout for the support. It is used to set the w...

1. Delamination is due to improper construction technique- My flying Wheeler is serial number 16, flying Wheeler # 3 first flew late 92 and has around 2300 airframe hours on it. I bought it, took it apart and rebuilt it. I found no issues with the glass at all. So to answer question 1- not that I am...

After a couple of hours of flying with the new mods, I have to report that these improvements are well worth the effort. The elevator trim has much more authority with much less trim deflection. Previously with just me flying, the CG was far enough forward to need a lot of trim for level flight and ...

I flew my CT, IO360 200 HP, C/S prop 2 blade- for about 10 hours last week. I too noticed more than average vibration in the side glass during flight at appx 135 knots. Didnt notice it so much until I pulled the RPM back to around 2350 which is my preferred cruise RPM. At 6500 ft and 2350 RPM my cru...

After several hours of flying, I made the following mods to my Wheeler CT- Incorporated a trim tab on the right aileron- 12 inches long and 1.5 inches wide. When I had full fuel tanks it only took about 15 mins of flying to get a wing heavy and take some effort to hand fly the plane. (2) I extended ...

It works- on my Linux machine I use Libre Office or Open office- I forgot to save it in excel format for "normal" people.
http://www.express-builder.com/documents/49EXWaB2.xls
Try it now.

Let me check- mine works.

Not sure- however I have sent a few messages over the past few weeks to them and have not gotten any responses. Maybe I should start making parts

You should be able to post pics, details, etc. If you cant let me know.

Kevin Alderman